Skip to main content

CAM Operation Renamer Trial

PKM-PRO

CAM Operation Renamer Trial

PKM-PRO

Rename CAM operations with templates, preview, and safe apply. Limited to 15 ops.

Trial

CAM Operation Renamer Trial is a free version that helps you standardize CAM operation names in Autodesk® Fusion® Manufacture workspace.

KEY FEATURES:

• Batch rename selected operations or entire setup (up to 15 operations)

• Template-based naming with automatic counter (e.g., "2D Pocket 1, 2D Pocket 2...")

• Live preview before applying changes

• Smart SKIP detection (suppressed, read-only, invalid selections)

• Safe apply with automatic rollback on errors

• Export diagnostic logs for troubleshooting support

• Works 100% offline - no license verification required

WHERE TO FIND:

Manufacture workspace → MILLING tab → CAM Operation Renamer (Trial) panel (after SELECT)

TRIAL LIMITATIONS:

• Limited to 15 operations per run

• No license verification required

• All features available (just smaller operation limit)

UPGRADE TO PRO:

For larger projects (up to 500 operations), upgrade to CAM Operation Renamer Pro.

COMPATIBILITY:

• Windows 10/11 (64-bit)

• Fusion with Manufacture workspace

PRICING:

Free - no credit card required, no license verification

SUPPORT:

Email: support@pkm-pro.pl

Privacy Policy: https://pkm-pro.pl/privacy-policy-camopren/#privpoltrial

Details

Frequently asked questions (FAQs)

COMMON ISSUES AND SOLUTIONS:

ISSUE: "Showing first 15 operations (limit)"

SOLUTION: This is normal for Trial. You're seeing the first 15 operations.

  • For more, upgrade to Pro (supports up to 500 operations).

ISSUE: "Security verification failed"

SOLUTION: Reinstall the add-in. If persists, contact support with log file.

ISSUE: Operations show as SKIP

REASONS:

  • SUPPRESSED: Operation is suppressed in CAM - unsuppress to rename
  • READ_ONLY: Operation is read-only - check if document is editable
  • NO_TOOLPATH: Operation has no toolpath generated
  • OTHER_SETUP: Operation is in different setup - select that setup.

ISSUE: "No operations found in selection"

SOLUTION:

  1. Switch to Manufacture workspace
  2. Select operations in browser or timeline
  3. Or select a setup to rename all operations inside

ISSUE: Cannot find add-in panel

SOLUTION: Look in Manufacture → MILLING tab (at the end, after SELECT panel)

  • Panel name: "CAM Operation Renamer (Trial)"

EXPORT DIAGNOSTIC LOG:

  1. Manufacture → MILLING tab → "CAM Operation Renamer (Trial)" panel → "Save Log" button
  2. Save last_run.log to desktop
  3. Email to support@pkm-pro.pl for faster resolution.

SUPPORT CHANNEL:

EMAIL SUPPORT: support@pkm-pro.pl

Response time: Within 1-2 business days

WHAT TO INCLUDE:

  1. Diagnostic log (use "Save Log" button)
  2. Fusion version (Help → About Fusion)
  3. Windows version
  4. Description of issue
  5. Steps to reproduce (if applicable).

Found an issue?

Report a problem