Autodesk® Civil 3D® Pipe Network, plastics piping trial catalog to be used according to EN standards (Trial Catalog). All pipes are fully based on EN/ISO standards. Additional information has been attached into pipe properties if applicable according to the standard (PN, SDR, SN, Design Coefficient C, Minimum Required Strength, Material Class etc.). In addition, classification property has been included with a default value to CCI (Construction Classification International) but it can be changed to any other if needed (through editing).

Manufacturer specific content (only in full version, Full Catalog) is now divided into its own catalog. Manufacturer specific pipes are also divided according to EN/ISO standard, but product names are used according to manufacturer data sheets. Additional parameters (if available) are included like Manufacturer, Manufacturer Source, Field of Application, Connection Type, Transport Type, Form Type, Color, Weight (kg/m) etc. More information about Manufacturer specific content can be found from the publisher webpage.

*Trial Catalog includes:

EN Plastic Pipes (Trial)

• Non-pressure (drainage, sewerage) (EN 1401-1) – PVC-U (SDR 27.6 – SDR 51; DN 110 – DN 1000) 

*Full Catalog includes (www.flowbim.ee):

• EN Plastic Pipes (Generic)
• EN Plastic Pipes (Pipelife)

EN Plastic Pipes (Generic) components based on the following standards:

• Conduit systems (for cable management) (EN 61386-24) – HDPE pipes (DN 25 – DN 250)
• Fibre organisers (optical fibre systems) (EN 50411-6-1) – LDPE / LLDPE / MDPE / HDPE / PP (DN 3 – DN 16)
• Non-pressure (drainage, sewerage) (EN 1401-1) – PVC-U (SDR 27.6 – SDR 51; DN 110 – DN 1000)
• Non-pressure (drainage, sewerage) (EN 1852-1) – PP (SDR 22 – SDR 41; DN 110 – DN 1600)
• Non-pressure (drainage, sewerage) (EN 12666-1) – PE (SDR 17 – SDR 33; DN 110 – DN 1600)
• Non-pressure (drainage, sewerage) (EN 13476-2) – PVC-U / PP / PE (Type A; DN 110 – DN 3000)
• Non-pressure (drainage, sewerage) (EN 13476-3) – PVC-U / PP / PE (Type B; DN 110 – DN 3000)
• Non-pressure (drainage, sewerage) (EN 14758-1) – PP-MD (SDR 33; DN 110 – DN 1000)
• Non-pressure (soil, waste – discharge) (EN 1451-1) – PP (SN 2 – SN 6.3; DN 32 – DN 315)
• Pressure (gas) (EN 1552-2) – PE (SDR 11 – SDR 17.6; DN 16 – DN 630)
• Pressure (water, drainage, sewerage) (EN 12201-2) – PE 40 / PE 80 / PE 100 (SDR 6 – SDR 41; DN 16 – DN 2500)
• Pressure (water, drainage, sewerage) (EN ISO 1452-2) – PVC-U (SDR 11 – SDR 41; DN 12 – DN 1000)
• Pressure (water, drainage, sewerage, irrigation) (EN 17176-2) – PVC-O (SDR 17 – SDR 65; DN 63 – DN 1200)

EN Plastic Pipes (Generic) components based on the following standards:

• Additional info available at publisher website

Note: Because pipes do have inner diameter values, those can be used for any kind of data extractions and/or calculations (when supported through data exchange). Pipe general diameter (DN) or any other property can be used in labels or taken over into Property Set Definitions.

Important: Content pack has been tested with Civil 3D 2027 only. Although the content pack is not fully tested with previous Civil 3D versions, it should work with some versions back without any major issues. Images/video shows trial/full content pack. Please start from trial content for any kind of testing as full (paid) version has "no refunds" policy.

Note: This app uses a custom installer (and not the standard App Store installer).