Skip to main content

Place Family in Link Model

BKJ Automation

Place Family in Link Model

BKJ Automation

Place host families at every matching location from a linked Autodesk® Revit® model — matching type, orientation, height, and level — in one operation, with a live 3D preview. Supports MEP.

$14.99/month

Place Family in Link Model by BKJ Automation automates one of the most tedious tasks in Revit coordination: recreating families from a linked model into your host model. Instead of placing each fixture, device, or piece of equipment by hand, you pick a single instance in the linked model, choose which family types to match, and the tool places your host family at every matching location — automatically matching orientation, height, and level.

Key Features:

  • Batch multi-type placement: select any number of family types from the linked model and place them all in one operation.
  • Live 3D preview: see exactly what will be placed before you commit.
  • Smart orientation and height matching: wall-mounted, ceiling-mounted, and floor-based families are placed with the correct rotation and elevation.
  • MEP support: works with electrical equipment, mechanical equipment, lighting, devices, fixtures, and system families including conduits, cable trays, pipes, and ducts (recreated from the link by type).
  • Parameter copying: transfers matching parameter values from the linked element to the placed host family.
  • Scope control: place across the entire model or limit to a single level.
  • Height offset: apply a global vertical adjustment to fine-tune placement.
  • Placement result report: a clear summary of what was placed, what was skipped, and why.

Typical Workflow:

  1. Open your host model with the linked model loaded.
  2. Launch "Place Family in Link" from the BKJ Automation panel on the Add-Ins tab.
  3. Pick any family instance in the linked model.
  4. In the dialog, check the family types you want to place and choose the host family type to use.
  5. Review the live 3D preview, set your scope and height offset, and click OK.
  6. Review the placement report.

Place Family in Link Model is ideal for MEP and architectural teams who need to mirror equipment, devices, fixtures, and routing from a consultant's linked model into their own model quickly and accurately — eliminating hours of manual placement and reducing coordination errors.

Compatible with Revit 2023, 2024, 2025, 2026, and 2027.

Details

Frequently asked questions (FAQs)

System Requirements:

  • Revit 2023, 2024, 2025, 2026, or 2027 (64-bit)
  • Windows 10 or Windows 11 (64-bit)
  • No separate .NET install is required — each Revit version provides its own runtime, and the app ships the matching build for every version.

Notes:

  • The tool loads on Revit's built-in Add-Ins tab, in the "BKJ Automation" panel.
  • A linked Revit model must be loaded in the host project to use the tool.
  • An active subscription is required to run the command.
  • A compatible host family must be loaded in the project. If no matching host family type is chosen, those linked elements are skipped and listed in the summary.
  • Wall-mounted families are placed on the nearest wall or a work plane; where no wall is near the target, orientation is derived from the linked element's facing direction.
  • System-family runs (conduit, cable tray, pipe, duct) are recreated by matching type name; if the exact type name is not present in the host model, the closest available type is used.
  • Very large linked models may take a few seconds to scan; the 3D preview updates after a brief pause.

Review the placement summary dialog after each run for details on any skipped elements.

For support, questions, or feature requests, contact BKJ Automation:

Email: brandonjones1528@yahoo.com

When reporting an issue, please include:

  • Your Revit version and build number
  • A description of what you were doing
  • Any error message shown in Revit
  • The log file from %AppData%\BKJ Automation\Logs\

We typically respond within 2 business days. Feature requests and feedback are welcome and may be included in future updates.

Found an issue?

Report a problem