BoltMakerPro
MakerPro DesignBoltMakerPro
MakerPro DesignPlace a bolt, flat washer and spring washer together in one action—no sketch needed. Works in Direct Modeling and on imported parts. Auto size, length and strength. JIS/ISO/ANSI
$48.00/year
BoltMakerPro — one-click fastener placement for Autodesk® Fusion®
Stop adding washers one at a time, and stop fighting sketch-based tools on imported parts. BoltMakerPro places a complete, correctly sized fastener stack straight from a selected hole edge.
WHY BOLTMAKERPRO
Bolt, washer and spring washer placed together in one action. Select a hole edge and the bolt, flat washer and spring washer go in as a single set — already sized, already stacked in the right order. The repetitive job of dropping in washers and lock washers one by one simply disappears, whether you are placing one fastener or dozens at once.
Works in Direct Modeling. BoltMakerPro runs on history-free bodies and imported geometry (STEP, IGES, supplier models) where sketch-based add-ins cannot. There is no sketch, no construction plane, and no timeline dependency — so it works the same on parametric designs and on non-parametric data you received from someone else.
HOW DOES IT WORK?
Select one or more circular hole edges (Ctrl-click for multiple). The hole diameter is measured automatically and the recommended bolt size is shown, so you never look up dimensions. A transparent preview updates in real time; click OK to place.
KEY FEATURES:
- Automatic size detection from the selected hole diameter, with the recommended size shown in the dialog.
- Bolt + flat washer + spring washer placed as one stack, in the correct order, with washer options you control.
- Automatic bolt length. With the Edge-to-Face reference, pick the head-side face and the hole edges; plate thickness is measured and length is set to plate thickness + washers + thread engagement, rounded up to JIS 5 mm increments or ANSI standard inch lengths.
- Back-side placement. Place a bolt through two plates with a nut on the far side; length is derived from the face-A to face-B distance, with an optional protrusion allowance. A dedicated flow handles slotted holes.
- Bolt strength display. Grade, tensile load and equivalent mass are shown in the dialog as an instant engineering sanity check.
- Many fastener types: hex bolt, socket head cap screw, hex nut, pan/truss / flat head machine screws, and flat / spring / thick washers.
SUPPORTED STANDARDS:
JIS / DIN, ISO, and ANSI / ASME. (Some machine screw types are not available in ANSI / ASME mode.)
FREE AND PRO:
Free mode covers M6 and 1/4 inch, so you can test the complete workflow at no cost. Pro (subscription) unlocks the full range, M3 to M24 and inch sizes, and is enabled automatically for active subscribers through your signed-in Autodesk account — there is no separate license key to manage.
LANGUAGES:
The command UI follows the Fusion language setting: English, Japanese, Simplified Chinese, German, French, Spanish and Korean. Unsupported languages fall back to English.
REQUIREMENTS
Fusion on Windows 10 or 11, in the Design workspace.
BoltMakerPro is part of the MakerPro Series — practical, sketch-free productivity add-ins for Fusion that read your geometry, apply the correct standard, and place finished parts without repetitive modeling.
Details
Frequently asked questions (FAQs)
What else should I know about this product?
BoltMakerPro is part of the MakerPro Series of sketch-free productivity add-ins for Fusion (BoltMakerPro, TapMakerPro, PipeMakerPro, FrameMakerPro). Supported standards: JIS / DIN, ISO, ANSI / ASME. UI languages: English, Japanese, Simplified Chinese, German, French, Spanish, Korean (other languages fall back to English). Direct Modeling (non-parametric) is fully supported.
Are there any known issues with this product?
Some machine screw types are not available in ANSI / ASME mode. If a fastener does not appear for a selected standard, switch to an equivalent standard or size.
Is there additional support information provided?
For questions, bug reports, or feature requests, contact MakerPro Design at makerpro.design@gmail.com. We typically respond within 2 business days (JST, Mon–Fri). Please include your Fusion version, OS, and a short description of the issue. Website: https://tkazoe.github.io/makerpro-design/
Found an issue?